How to Specify Water-Resistant Woven Fabric for a Structured Tote
Plan a water-resistant woven tote brief around the outer fabric, lining, zip-top edge, pocket openings, and checks on an approved sample.
Updated October 26, 2026 | 4 min read | Published by Oksaur Outdoor

Start with the material requirement
Model 260711 is listed with water-resistant woven fabric and a soft lining. Put the outer fabric, colour, and intended carry use in the brief before setting the zip-top edge or pocket details.
Describe the woven finish clearly
Record the woven fabric reference, surface appearance, colour, and lining choice in the construction notes. Treat water resistance as a product requirement to check on the sewn tote. Confirm the chosen fabric and finish on the approved sample.
Review the fabric around the zip-top edge
The tote has a zip-top closure. Check the outer fabric, zipper tape, top edge binding, lining turn, and seam allowance together. The zipper should move without catching the lining, and the top edge should keep its shape when the tote is carried.
Check pockets against the tote body
Model 260711 has an inner zip pocket and slip pockets in the main compartment. Review each opening with the woven outer and soft lining so the pocket edges stay flat and the fabric layers do not pull the tote out of shape.
Load the approved dimensions
The structured zip-top tote is listed at 41 × 29 × 12 cm and is specified to carry a tablet, notebook, phone, wallet, and daily essentials. Put those items into the sample, open the zip-top, and check the fabric, pocket reach, and side panels while the tote is carried.
Record the fabric that was approved
Keep the outer fabric, woven finish, lining, colour, pocket layout, zip-top details, logo method, labels, packaging, and sample changes in one record. The product customization fields allow fabric, colour, logo, lining, pockets, labels, and packaging changes. Confirm the approved sample before the production brief is released.
Discuss a water-resistant woven tote specification
Send the model number, quantity, artwork, destination, and required date. We will reply with the remaining questions needed for pricing and sampling.